Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterSpring Repair in Sherman Oaks, CA
When your garage door won’t open or makes a loud bang in the middle of the night, it’s almost always a broken spring. A standard garage door weighs between 150 and 400 pounds, and those springs are the only thing holding that weight up when the door is closed. In Sherman Oaks, we see spring failures regularly, often caused by the fluctuating temperatures that affect metal tension or simply years of daily use. If your door is stuck or won’t lift more than a few inches, call us at (747) 359-3554. We provide same-day service to get your car out of the garage and your home secured again.
At Otto’s Garage Door, we don’t send a dispatch team; I show up myself. Since 2004, I have been helping neighbors across the valley with Garage Door Repair in Sherman Oaks. Whether you are dealing with a standard torsion spring system or an older extension spring setup, the repair process is dangerous if you don’t have the right tools. A door is 200 pounds riding on two springs. Respect it. I count spring cycles the way you count tire miles, and I will tell you exactly what kind of life is left on your hardware before I touch a single bolt. When you call us, you get a real person, an upfront quote, and the peace of mind that comes with the 90-Day Done Right Promise.
When You Need Spring Repair
You don’t always need a professional to know that a spring has snapped, but you definitely need one to fix it. Here are the clear signs that your garage door springs have failed:
- The Loud Bang: If you heard a noise like a firecracker or a gunshot coming from your garage, that was likely the spring snapping. It’s the sound of high-tension steel letting go.
- Door Won’t Open: If you press the button and the opener hums or struggles but the door barely moves an inch, do not keep trying. The opener is not designed to lift the door without the help of the springs, and you will burn out the motor.
- The Door Is Crooked: If the door looks like it’s hanging lower on one side or is visibly uneven when it tries to move, one of the springs has likely failed. This puts immense stress on the cables and the opener drive.
- Gap in the Coil: If you look up at the spring shaft (above the door) and see a distinct gap or separation in the metal coils, the spring is broken.
- Door Feels Heavy: If you pull the emergency release cord and try to lift the door by hand, and it feels impossibly heavy, your springs are no longer balancing the weight of the door.
If you notice any of these in your Sherman Oaks home, stop using the door immediately. Trying to force a door with a broken spring can rip the mounting bracket off the wall or snap the cables, which turns a simple spring job into a Cable Repair and a much more expensive fix. Call (747) 359-3554, and I will be there to assess the situation myself.
Our Spring Repair Process
I believe in transparency. When I arrive at your home, I don’t just swap a part and leave. I follow a specific procedure to make sure your door is balanced and safe for the next several years. If you need general Garage Door Repair services beyond just the springs, I check those during this process as well.
- Inspection and Safety Check: I first inspect the entire system, including the cables, rollers, and hinges. I look for wear and tear that might have contributed to the spring failure in the first place.
- Cycle Rating Verification: I don’t install generic springs. I calculate the weight of your specific door and install high-cycle, oil-tempered springs that are rated for your usage. I count the cycles so you know exactly what you are paying for.
- System Tensioning: Once the new springs are installed, I tension them to perfectly counterbalance the weight of your door. A properly balanced door should stay in place if you lift it halfway and let go.
- Safety Test: I run the door through several open-and-close cycles to ensure the opener is not straining and that the door travels smoothly along the tracks without binding.
- Lubrication and Adjustment: I lubricate all moving parts, including the tracks and hinges, to ensure the system operates quietly and efficiently.
I treat every door as if it were my own. My name is on the license, and my 90-Day Done Right Promise is written on every invoice. If it isn’t right, you call me, and I come back to fix it-no runaround.
Spring Repair Pricing in Sherman Oaks
Pricing for spring repair in Sherman Oaks typically ranges between $220 and $450 for a full system replacement, depending on the weight of your door and the type of spring required (standard vs. high-cycle). For a full breakdown of what to expect, see our guide on How Much Does Garage Door Repair Cost? (2026 Price Guide) - Sherman Oaks, CA. I never change the price between the phone call and the driveway. When you call (747) 359-3554, I will give you an honest estimate based on what you describe.
| Service Item | Estimated Range |
|---|---|
| Standard Torsion Spring Replacement (Single) | $220 – $300 |
| Dual Torsion Spring Replacement (Full System) | $300 – $450 |
| Extension Spring Replacement (Per Pair) | $220 – $350 |
We offer a permanent 10% discount for seniors and veterans because the community comes before the margin. We also have a standing offer of $40 off any repair over $200. If you have received a written estimate from another company, I am happy to provide a Free Second Opinion. I would rather you be informed and safe than pay for work you might not actually need.
FAQs - Spring Repair
Can you fix my garage door spring today?
Yes, we prioritize spring repairs because a broken spring usually means your car is trapped. If you call us in the morning, I can almost always get to your Sherman Oaks home the same day. Call (747) 359-3554 to check our current availability.
Should I replace one spring or both?
In almost every case, you should replace both springs at the same time. If one spring has failed, the other has endured the exact same amount of wear and tension cycles and is likely to snap shortly after. Replacing both ensures the door is balanced evenly, which prevents premature wear on your opener and cables.
Is it cheaper to repair or replace the garage door?
If the issue is only the springs, it is significantly cheaper to repair the system. You only need a full door replacement if the panels are damaged, the door is rotting, or the structure has been compromised by an impact. I will always be upfront about whether your door is worth fixing or if you are throwing money at a system that is past its prime.
Why does my garage door sound like it’s struggling?
If your door is humming or struggling to lift, it’s usually because the springs have lost their tension, the Track Realignment is off, or the opener is failing. It’s almost never the opener itself; it’s usually the springs failing to do their job. If the opener is straining, stop using it immediately, as you risk stripping the gears inside the motor unit. Call us, and I can test the balance of your door to see if a simple spring adjustment or replacement will solve the problem.
When you need someone you can trust, call (747) 359-3554. We are locally owned and owner-operated, and I am ready to help you get your garage door back in working order. Estimates are always free.
Written by Otto Reinhardt, Owner at Otto’s Garage Door, serving Sherman Oaks.